Door Lock

Door Lock

Removing

- Remove housing. Refer to => [ Housing ] Housing.

- Remove door handle. Refer to => [ Door Handle ] Door Handle.

- Remove outer door panel. Refer to => [ Outer Door Panel ] Outer Door Panel.

- Remove bearing bracket. Refer to => [ Bearing Bracket ] Bearing Bracket.

- Disconnect connector - 5 -.

- Remove bolts - 6 -.

- Disengage cable - 1 - from actuator lever - 8 - and remove door lock - 4 -.

Cover - 3 - is not supplied with delivery casing of door lock.





Installing

Installation is performed in the reverse order of removal.

Tightening specification for bolts: 18 Nm

Then a function test must be performed with door open, since the door cannot be opened if release is not correctly adjustment or clipped in.