Diagram 251/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Seat Occupied Recognition Pressure Sensor, Seat Occupied Recognition Safety Belt Force Sensor, Airbag Control Module, Vehicle Electrical System Control Module, Seat Occupied Recognition Control Module, Front Passenger's Airbag Igniter 1, Front Passenger's Side Airbag Igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G452 - Seat Occupied Recognition Pressure Sensor Passive Occupant Detection System

G453 - Seat Occupied Recognition Safety Belt Force Sensor Passive Occupant Detection System

J234 - Airbag Control Module Locations Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J706 - Seat Occupied Recognition Control Module Passive Occupant Detection System

N199 - Front Passenger's Airbag Igniter 1 Airbag Component Locations

N200 - Front Passenger's Side Airbag Igniter Airbag Component Locations

T3 - 3-Pin Connector

T3a - 3-Pin Connector

T3k - 3-Pin Connector, yellow, in front left footwell

T3aa - 3-Pin Connector, yellow, below driver's seat

T3ab - 3-Pin Connector, yellow, below front passenger's seat

T3l - 3-Pin Connector, yellow, in front right footwell

T10r - 10-Pin Connector

T18e - 18-Pin Connector

T75 - 75-Pin Connector on J234

Previous Diagram 251/4 (Tracks 29-42)

Next Diagram 251/6 (Tracks 57-70)