Fog Lamps, from MY 10

Fog Lamps, from MY 10

• The following illustrations depict removal and installation of left fog lamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 -.






- Remove the bolt - arrow -.






- Remove the fog lamp housing from the bumper cover.

- Release and disconnect the harness connector - arrow -.






- Remove the fog lamp housing.

Installation

Installation is performed in the reverse order of removal. Note the following:

- Tighten the threaded connections to the tightening specification. Refer to => [ Fog Lamps Overview, from MY 10 ] Fog Lamps Overview, from MY 10.

- Check headlamp for functions.

- Check the fog lamp adjustment.