Front Turn Signal Bulb

Front Turn Signal Bulb

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show replacing a bulb in a left headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Remove the cap - 1 -.






- Turn the bulb socket - 1 - in - direction of arrow - and pull the left front turn signal bulb (M5) out of the headlamp.






- Press the button - arrow - and pull the left front turn signal bulb - 1 - upward out of the bulb socket.






• The left front turn signal bulb and the bulb socket are a single piece and cannot be disassembled.

Bulb: 12 V/24 W

Installation


• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

Installation is performed in the reverse order of removal. Note the following:

• The bulb socket has two tabs-each having a different length, for locking into the reflector.

• Insert the bulb socket and the left front turn signal bulb into the reflector so that the longer tab is at the top.

- Check headlamp for functions.