Backrest

Backrest

Removal

Sedan

- Remove seat bench. Refer to => [ Seat Bench ] Seat Bench.

Wagon

- Fold the bench seat forward.

All Vehicles

- Fold back floor carpet in area of center backrest bearing - 4 -.

- If present, remove the trim - 1 - from the center backrest bearing.

- Remove bolt - 2 - (9 Nm).

- Remove clamp - 3 - from center backrest bearing.

- Lift out right backrest - 5 - from center backrest bearing and pull backrest off pin - 6 -.

- Remove bolt - 8 - (40 Nm) and remove belt buckle - 9 - from floor.

- Remove right backrest from vehicle.

- Lift out left backrest - 7 - from center backrest bearing and pull backrest off pin.





Installation

- To install, perform the steps used for removal in reverse order.