Radiator Cooling Fan: Service and Repair

Fan Shroud and Fans

Removing

- Remove the noise insulation.

- Unclip the lower coolant hose from the fan shroud.

- Disconnect the electrical harness connector - 1 - and remove the fan shroud bolts - arrows -.






- Remove the fan shroud downward.

- Disconnect the electrical harness connector - 1 - and lay the wire free. Installed position of the harness connector deviates from the illustration.






- Remove the nuts - arrows - and remove the fans.

Installing

Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specifications