Exhaust Side

Exhaust Side






1 EGR Temperature Sensor (G98) Connector

2 Exhaust Pressure Sensor 2 (G451) 3-Pin Connector

• Note the installation location.

3 Heat Shield

• Note the installation location. Refer to=> [ Heat Shield Installation
Information ] Engine Wiring Harness Installation Information.

• Replace if damaged.

4 EGR Valve 2 (N213) Connector

5 Cable Tie On Control Wire

• Note the installation location.

• Replace

6 EGR Temperature Sensor (G98)

7 Coolant Temperature Sensor (G62) , 2-pin