General Information

General Information

• Always switch off headlamps and remove ignition key before working on headlamps.

• Familiarity with the function and operation of the lighting system is essential in the event of customer complaints.

Additional information:

Refer to the Owner's Manual.

Headlamps from two different manufacturers are installed:

• Hella

• Valeo

Removal and installing the headlamps is identical except for removing and installing the headlamp range control positioning motor and the cap behind the low beam bulb.

DTC Recognition and Display

The vehicle electrical system control has On Board Diagnostic (OBD) capabilities.

Use the Vehicle Diagnosis, Testing and Information System (VAS 5051B) under "Guided Fault Finding".