Turn Signal Bulb, Replacing

Turn Signal Bulb, Replacing

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show replacing a bulb in the right headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Turn the cap - 2 - counter-clockwise and remove it.






- Turn the bulb socket - 1 - in - direction of arrow - and remove it together with the right front turn signal bulb (M7) from the reflector.






- Press the locking mechanism - arrows - and remove the right front turn signal bulb - 1 - from the bulb socket - 2 -.






• The right front turn signal bulb and the bulb socket are a single piece and cannot be disassembled.

Installation


• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Installation is performed in the reverse order of removal. Note the following:

- Check headlamp for functions.