Diagram 150/31 (Tracks 407-420)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power and signal splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G336 - Intake Manifold Runner Position Sensor

G450 - Exhaust Pressure Sensor 1 Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J623 - Engine Control Module (ECM) Locations

J743 - Direct Shift Gearbox (DSG) Mechatronic

SB5 - Fuse 5 (on fuse panel B)

SB13 - Fuse 13 (on fuse panel B)

T5p - 5-Pin Connector

T14a - 14-Pin Connector

T20e - 20-Pin Connector

T40 - 40-Pin Connector

T94 - 94-Pin Connector

(D92) - Connection (30 al) (in engine compartment wiring harness)


- Location: in vehicle 2,0 L Diesel: In main wiring harness between wiring circuits for J743 - Direct Shift Gearbox (DSG) Mechatronic and 655 - Ground Connection (on left headlamp)


- Location: in vehicle 2,0 L: In main wiring harness between wiring circuits for J743 - Direct Shift Gearbox (DSG) Mechatronic and V55 - Recirculation Pump

(D111) - Connection 9 (in engine compartment wiring harness)


- Location: In wiring circuit between main harness and J623 - Engine Control Module (ECM)

(D182) - Connection 3 (87a) (in engine wiring harness)


- Location: In wiring circuit between main harness and J623 - Engine Control Module (ECM)

Previous Diagram 150/30 (Tracks 393-406)

Next Diagram 150/32 (Tracks 421-434)