Diagram 216/25 (Tracks 323-336)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply and Plus Connection (in wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Locations

J317 - Power Supply Relay (terminal 30) Locations

J400 - Wiper Motor Control Module

J519 - Vehicle Electrical System Control Module Locations Locations

J623 - Front Information Display Control Head Control Module Locations

SB10 - Fuse 10 (on fuse panel B)

T2t - Double Connector

T2u - Double Connector

T4p - 4-Pin Connector

T40 - 40-Pin Connector

T94 - 94-Pin Connector

Z20 - Left Washer Nozzle Heater

Z21 - Right Washer Nozzle Heater

(B528) - LIN-Bus Connection 1 (in main wiring harness)


- Component Location: Between main wiring harness and T8d - 8-Pin Connector, roof

(C53) - Plus Connection (x) (in heated spray jet wiring harness)


- Component Location: In main wiring harness between W32 - Right Front Entry Light and output nozzle in engine compartment

(D78) - Plus Connection 1 (30a) (in engine compartment wiring harness)


- Component Location: Between main wiring harness and electronics box

Previous Diagram 216/24 (Tracks 309-322)

Next Diagram 216/26 (Tracks 337-350)