Diagram 216/39 (Tracks 519-532)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply and Plus Connection (in wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G40 - Camshaft Position (CMP) Sensor Locations

G69 - Throttle Valve Position Sensor 2.5L BGP, BGQ, CBTA and CBUA

G212 - EGR Potentiometer Locations

G247 - Fuel Pressure Sensor Locations

G410 - Low Fuel Pressure Sensor

G581 - Charge Pressure Actuator Position Sensor

G609 - Secondary Air Injection (AIR) Sensor 1 Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J623 - Engine Control Module (ECM) Locations

T6ak - 6-Pin Connector

T6at - 6-Pin Connector

T60 - 60-Pin Connector

(D105) - Plus Connection 3 (58d) (in engine compartment wiring harness)


- Component Location: Between main wiring harness and J623 - Engine Control Module (ECM)

(D107) - Connection 5 (in engine compartment wiring harness)


- Component Location: 2.5L models: Between main wiring harness and J623 - Engine Control Module (ECM)


- Component Location: 2.0L models: In main wiring harness between G61 - Knock Sensor 1 and T14a 14-Pin Connector

Previous Diagram 216/38 (Tracks 505-518)

Next Diagram 216/40 (Tracks 533-546)