Mirror Glass

Mirror Glass

Removing


Wear protective eyewear and gloves when working!

- Protect housing edge - 1 - from paint damage e.g. cover using fabric-reinforced adhesive tape.





- Press mirror glass - 2 - at bottom into mirror housing - 1 -.

- Press mirror glass - 2 - using lever (80-200) from adjusting unit with motor - 5 - - arrow 6 -.

- Swivel mirror glass - 2 - to the side - arrow 4 - and disconnect the installed connector terminals - 3 - for electric dimming function and mirror heater from rear side of mirror glass - 2 -.

Installing

- Insert connector terminals to mirror glass.

- Press mirror glass at center onto adjusting unit with motor in housing.

- Mirror glass will engage audibly.

- Perform a function test.