Diagram 64/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Ground splices





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Left Safety Belt Switch

E25 - Front Passenger's Safety Belt Switch

J234 - Airbag Control Module Locations Locations

J446 - Parking Aid Control Module Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J706 - Seat Occupied Recognition Control Module Passive Occupant Detection System

N131 - Front Passenger's Airbag Igniter 1 Airbag Component Locations

N132 - Front Passenger's Airbag Igniter 2 Airbag Component Locations

N199 - Igniter for side airbag, driver's side Airbag Component Locations

N200 - Igniter for side airbag, passenger side Airbag Component Locations

N201 - Igniter for side airbag rear, driver's side Airbag Component Locations

N202 - Igniter for side airbag rear, passenger side Airbag Component Locations

T2j - Double Connector

T2k - Double Connector

T2aa - Double Connector

T2ab - Double Connector

T3k - 3-Pin Connector

T3l - 3-Pin Connector

T3s - 3-Pin Connector

T3t - 3-Pin Connector

T5i - 5-Pin Connector

T10r - 10-Pin Connector

T16h - 16-Pin Connector

T75 - 75-Pin Connector

V155 - Motor for fuel tank lid unlock Central Locking / Anti-Theft Systems

(86) - Ground Connection 1, in rear wiring harness


- Location: In main wiring harness between wiring circuits for N197 - Rear Safety Belt (front passenger's side) Tensioner Igniter and W3 - Luggage Compartment Light

(109) - Ground Connection, in airbag wiring harness Location: In wiring circuit between main wiring harness and J234 - Airbag Control Module

(663) - Ground Connection (on right rear C-pillar)

Next Diagram 64/3 (Tracks 15-28)