Parking Lamp Bulb

Parking Lamp Bulb

• It is not necessary to remove the headlamp when replacing the headlamp bulb.

• The following illustrations show replacing a bulb in the left headlamp.


• Turn off the ignition and all electrical consumers.

• Remove the key.

Removal

- Turn the cap - 2 - counter-clockwise and remove it.






- Remove the bulb socket - 1 - and left side marker lamp bulb (M1) from the reflector. Be careful of the different wire lengths still connected.






- Pull the left side marker lamp bulb - 1 - straight out of the bulb socket - 2 - in - direction of arrow -.






Installation


• When installing cap, ensure proper seating. It is destroyed by entry of water into headlamp.

• Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is switched on, will evaporate and cloud the glass.

Installation is performed in the reverse order of removal. Note the following:

- Check headlamp for functions.