Turn Signals: Service and Repair

Exterior Rearview Mirror

Side Turn Signals

• There are no conventional bulbs, but rather durable light emitting diodes (LEDs) installed in the side turn signals.

• Therefore it is not necessary to change light bulbs. In case of damage, the entire turn signal assembly must be replaced.

Removing

- Remove mirror glass. Refer to --> [ Mirror Glass ].

- Remove mirror housing. Refer to --> [ Mirror Housing ].

- Remove trim. Refer to --> [ Trim Panel ].





- Remove screws - 4 - and remove assembly piece - B - downward.

- Disconnect harness connector - 5 - from turn signal - 3 -.

- Remove screws - 2 - and remove turn signal - 3 - from assembly piece - 1 -.

Installing

Installation is performed in the reverse order of removal.

- Perform a function test.