Diagram 216/32 (Tracks 421-434)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply and Plus Connection (in wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G465 - Oxygen Sensor (O2S (in Center Three Way Catalytic Converter (TWC), Bank 1 Locations

J299 - Secondary Air Injection (AIR) Pump Relay

J519 - Vehicle Electrical System Control Module Locations Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve Locations

SB15 - Fuse 15 (on fuse panel B)

SB23 - Fuse 23 (on fuse panel B)

T3d - 3-Pin Connector

T4v - 4-Pin Connector

T4ao - 4-Pin Connector

T14a - 14-Pin Connector

T40 - 40-Pin Connector

V144 - Leak Detection Pump (LDP) Locations

(E7) - Leak Detection Pump (LDP)


- Component Location: In power supply (SC) main wiring harness

(E30) - Connection (87a) (in engine compartment wiring harness), Component Location for 2.5L models: In main wiring harness between power supply (SC) and SC

Previous Diagram 216/31 (Tracks 407-420)

Next Diagram 216/33 (Tracks 435-448)