Operation CHARM: Car repair manuals for everyone.

Diagram 179/10 (Tracks 113-126)






IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Coolant Temperature (ECT) Sensor (on Radiator), Throttle Valve Control Module, Engine Control Module (ECM), Ignition Coil 5 with Power Output Stage, Spark Plugs





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G69 - Throttle Valve Position Sensor 2.5L BGP, BGQ, CBTA and CBUA

G83 - Engine Coolant Temperature (ECT) Sensor (on Radiator) Locations

G186 - Throttle Drive (for Electronic Power Control (EPC) Locations

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) Locations

J338 - Throttle Valve Control Module Locations

J519 - Vehicle Electrical System Control Module Locations Locations

J623 - Engine Control Module (ECM) Locations

N323 - Ignition Coil 5 with Power Output Stage Locations

P - Spark Plug Connectors

Q - Spark Plugs

T4aj - 4-Pin Connector

T6x - 6-Pin Connector

T60 - 60-Pin Connector

T94 - 94-Pin Connector

(85) - Ground Connection 1 (in engine compartment wiring harness)

(281) - Ground Connection 1 (in engine pre-wiring wiring harness)

(D20) - Connection (87a) (in front right wiring harness)

(D108) - Connection 6 (in engine compartment wiring harness)

(D109) - Connection 7 (in engine compartment wiring harness)

Previous Diagram 179/9 (Tracks 99-112)

Next Diagram 179/11 (Tracks 127-140)