Release, Disconnecting

Release, Disconnecting






- Open the hood.

- Install the cover for the cable coupling - 2 - above the headlamp on the driver side - arrow a -.

- Remove the release cables - 1 and 3 - from the cover - 2 - - arrow b -.

- Pivot the release cable - 3 - 90° - arrow c - and remove it from the mount - 1 - in the - direction of arrow d -.

• Make sure the grommets - 4 and 5 - are secure when installing the release cable - 3 -.

• Make sure the cable coupling - 2 - is connected correctly when installing the release cable - 1 -.

• Before closing the hood, test the release lever and the release.