Mirror Glass

Mirror Glass

• Removing and installing is performed only for the left mirror glass. Removing and installing right mirror glass is derived accordingly from this.

Removing


Wear protective eyewear and gloves when working.

- Protect housing edge - 1 - from paint damage, for example, cover using fabric-reinforced adhesive tape.






- Press the bottom of the mirror glass - 2 - into the mirror housing - 1 -.

- Press mirror glass - 2 - using lever (80-200) from adjusting unit with motor - 5 - - arrow 6 -.

- Swivel mirror glass - 2 - to the side - arrow 4 - and disconnect the installed connector terminals - 3 - for electric dimming function and mirror heater from rear side of mirror glass - 2 -.

Installation

- Insert connector terminals to mirror glass.

- Press mirror glass at center onto adjusting unit with motor in housing.

- The mirror glass will engage with a click.

Then perform a function test.