Diagram 21/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine control module, Secondary air injection solenoid valve, Leak detection pump





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J623 - Engine control module Locations

N112 - Secondary air injection solenoid valve Locations [1][2]Air Injection Control Valve

T3d - 3-pin connector

T14a - 14-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

V144 - Leak detection pump Locations [1][2]Diagrams

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(E7) - Connection (87a) (in Motronic multiport fuel injection wiring harness)

* - Depending on equipment

Previous Diagram 21/17 (Tracks 211-224)

Next Diagram 21/19 (Tracks 239-252)