Diagram 40/6 (Tracks 57-70)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Driver side airbag crash sensor, Front passenger side airbag crash sensor, Airbag control module, Driver thorax airbag igniter, Front passenger thorax airbag igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G179 - Driver side airbag crash sensor Locations Driver Side Airbag Crash Sensor -G179- and Front Pass Side Airbag Crash Sensor -G180-

G180 - Front passenger side airbag crash sensor Locations Driver Side Airbag Crash Sensor -G179- and Front Pass Side Airbag Crash Sensor -G180-

J234 - Airbag control module, under the center console Air Bag Control Module

N199 - Driver thorax airbag igniter Airbag Component Locations Front Pass Thorax Airbag Igniter -N200- and Driver Thorax Airbag Igniter -N199-

N200 - Front passenger thorax airbag igniter Airbag Component Locations Front Pass Thorax Airbag Igniter -N200- and Driver Thorax Airbag Igniter -N199-

T3aa - 3-pin connector, under the driver seat

T3ab - 3-pin connector, under the front passenger seat

T3k - 3-pin connector, under the driver seat

T3l - 3-pin connector, under the front passenger seat

T28 - 28-pin connector, behind the lower left A-pillar trim

T28a - 28-pin connector, behind the lower right A-pillar trim

T50 - 50-pin connector

(109) - Ground connection (in airbag wiring harness)

Previous Diagram 40/5 (Tracks 43-56)

Next Diagram 40/7 (Tracks 71-84)