Steering Lock Housing

Steering Lock Housing


Always follow the instructions regarding disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

To remove the steering lock housing, remove the steering column switch base carrier first.


• Steering lock may be destroyed.

• If the steering lock is operated without lock cylinder, it will lock up and then it will have to be replaced.

• Steering lock must not be operated without lock cylinder.

Removal

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the steering column switch base carrier:

• Vehicles with access/start control module, refer to Valeo => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or Kostal=> [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.

• Vehicle with an ignition switch (D) and a lock cylinder, refer to => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or => [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.