Front Wheel Housing Liner

Front Wheel Housing Liner






Rear part of wheel housing liner

- Remove the wheel.

- Remove the bolts - 2 -.

- Remove the rear part of the wheel housing liner - 1 - from the fender.

Front part of wheel housing liner

- Remove the bolts - 4 -.

- Remove the bolts on the left side of the noise insulation. Refer to => [ Noise Insulation Assembly Overview ] Description and Operation.

- Remove front part of wheel housing liner - 3 -.

Installation






• Check the expanding nuts - 5 - for damage and replace if necessary.

Installing the front part of the wheel housing liner - 3 - and the back part - 1 - is in reverse order of removal.

- Position the bolts - 2 - and - 4 - and tighten them to 2 Nm.

- Position the bolts on the left side of the noise insulation and tighten them to 2 Nm. Refer to => [ Noise Insulation Assembly Overview ] Description and Operation.