Diagram 42/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument cluster control module, Vehicle electrical system control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G - Fuel level sensor Locations

G6 - Transfer fuel pump Locations

G34 - Left front brake pad wear sensor Locations

J17 - Fuel pump relay Locations

J285 - Instrument cluster control module

J519 - Vehicle electrical system control module Locations

J643 - Fuel primer relay Locations

N30 - Cylinder 1 fuel injector Locations Fuel Injectors Cyl 1 -N30- / Cyl 2 -N31- / Cyl 3 -N32- / Cyl 4 -N33- / Cyl 5 -N83-

N31 - Cylinder 2 fuel injector Locations Fuel Injectors Cyl 1 -N30- / Cyl 2 -N31- / Cyl 3 -N32- / Cyl 4 -N33- / Cyl 5 -N83-

N32 - Cylinder 3 fuel injector Locations Fuel Injectors Cyl 1 -N30- / Cyl 2 -N31- / Cyl 3 -N32- / Cyl 4 -N33- / Cyl 5 -N83-

N33 - Cylinder 4 fuel injector Locations Fuel Injectors Cyl 1 -N30- / Cyl 2 -N31- / Cyl 3 -N32- / Cyl 4 -N33- / Cyl 5 -N83-

N83 - Cylinder 5 fuel injector Locations Fuel Injectors Cyl 1 -N30- / Cyl 2 -N31- / Cyl 3 -N32- / Cyl 4 -N33- / Cyl 5 -N83-

T2y - Double connector

T5b - 5-pin connector

T14a - 14-pin connector

T32c - 32-pin connector

(B350) - Positive connection 1 (87a) (in main wiring harness)

(B379) - Brake wear indicator connection 1 (in main wiring harness)

(D136) - Positive connection 2 (15a) (in engine compartment wiring harness)

Previous Diagram 42/18 (Tracks 225-238)

Next Diagram 42/20 (Tracks 253-266)