Diagram 50/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Steering torque sensor, Instrument cluster control module, Power steering control module, Electromechanical power steering motor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G269 - Steering torque sensor Electromechanical Steering Gear Assembly Overview - Gen 2 [1][2]Diagrams

J285 - Instrument cluster control module

J500 - Power steering control module Locations [1][2]Diagrams

J533 - Data bus on board diagnostic interface Locations

J623 - Engine control module Locations

SA2 - Fuse 2 (on fuse panel A) Locations

T2l - Double connector

T4ae - 4-pin connector

T5g - 5-pin connector

T5h - 5-pin connector

T6z - 6-pin connector

T20 - 20-pin connector

T32c - 32-pin connector

V187 - Electromechanical power steering motor Electromechanical Steering Gear Assembly Overview - Gen 2 [1][2]Diagrams

(507) - Terminal 30 threaded connection (on battery fuse holder)

(640) - Ground connection 2 in engine compartment, left

(A199) - Positive connection 4 (15a) (in instrument panel wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

Previous Diagram 50/2 (Tracks 1-14)