Diagram 127/15 (Tracks 183-196)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Emergency flasher button, Back-up lamp switch, Vehicle electrical system control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E229 - Emergency flasher button

F4 - Back-up lamp switch Locations

G65 - High pressure sensor Engine Compartment A/C System [1][2]Diagrams

J386 - Driver door control module Locations

J387 - Front passenger door control module Locations

J519 - Vehicle electrical system control module Locations

J533 - Data bus on board diagnostic interface Locations

K6 - Emergency flasher indicator lamp

T2ak - Double connector

T3c - 3-pin connector

T6bq - 6-pin connector

T20 - 20-pin connector

T20a - 20-pin connector

T20b - 20-pin connector

T52a - 52-pin connector

T52b - 52-pin connector

T52c - 52-pin connector

(A20) - Positive connection (15a) (in instrument panel wiring harness)

(B397) - Comfort system CAN bus high connection 1 (in main wiring harness)

(B406) - Comfort system CAN bus low connection 1 (in main wiring harness)

* - Depending on equipment

*2 - Through December 2010

Previous Diagram 127/14 (Tracks 169-182)

Next Diagram 127/16 (Tracks 197-210)