Headlamp Washer System

Headlamp Washer System

For every fifth activation of windshield washer system, headlamps are also washed if windshield wiper lever is pulled toward steering wheel for at least 1.5 seconds - as long as low beam or high beam headlamps are switched on.

The spraying time of the headlamp washer system can be set from 0 to 12.75 seconds. It is set via the vehicle electrical system control module (J519).

After assembly work or when first operating headlamp cleaning system, it must be ventilated to ensure proper function of lift cylinders and spray nozzles. Refer to=> [ Headlamp Washer System, Bleeding ] Procedures.

Additional information:

• Refer to the Owner's Manual.

DTC Recognition and Display

The Vehicle Electrical System Control Module (J519) is equipped with OBD.

Use the Vehicle diagnostic tester under "Guided Fault Finding".