Antenna Wires

Antenna Wires

A new repair concept has been developed for repairing antenna wires. Instead of a complete antenna wire, connecting wires of different lengths and various adapter leads are now available as replacement parts.

• If a repair is necessary, antenna wires may not be repaired, but rather are to be replaced with genuine replacement parts, such as connecting wires and adapter leads.

• These genuine replacement parts are suitable for all antenna wires and wire cross sections, that require replacement.

• The replacement of individual antenna connectors during repair work is not intended.

• The wires are appropriate for use on all VW models with equipped antenna wiring cross-sections.

• All adapter leads and connecting wires are suitable for various transmission and reception signals.

• This repair concept can also be used for testing or as an after-market solution.

Assembly Overview

Example - Antenna wire from radio to antenna is faulty. The following wires are required for repair:





1. Adapter lead for connection to radio. Length approximately 30 cm.

2. Connecting wire, available in various lengths.

3. Adapter lead, for connection to antenna. Length approximately 30 cm.