Radiator Cooling Fan: Service and Repair

Fan Shroud with Coolant Fan

Removing

CAUTION!
Hot steam may escape when opening the expansion tank cap. Wear protective goggles and protective clothing to prevent damage to eyes and scalding. Cover the cap with a cloth and open very carefully.

- Drain the coolant. Refer to => [ Draining and Filling ] Draining and Filling.

- Bring the lock carrier into service position. Radiator Support

- Support the lock carrier using a sleeve - B -, 80 millimeters (mm) in length, for example, from (VW 540/1A) and a M8 x 100 bolt - A -.





- Disconnect electrical connector - A -.





- Remove the bolts - arrows - for the fan shroud.





- Remove the fan shroud.

Installing

Installation is performed in the reverse order of removal. When doing this note the following:

Tightening Specifications