Headlamp Adjuster and Instrument Panel Illumination Dimmer Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Headlamp Adjuster and Instrument Panel Illumination Dimmer Switch

The Headlamp Adjuster (E102)/ Instrument Panel Illumination Dimmer Switch (E20) are a single unit and cannot be replaced separately.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Carefully loosen the switch housing from the frame with a small screwdriver and remove it.





- Disconnect electrical connector.

Installing

Install in reverse order of removal.