Headlamp Switch

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Headlamp Switch

The Fog Lamp Switch (E23) is integrated in the Headlamp Switch (E1).

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Turn the Light Switch (E1) rotary knob to the "0" position.

- Press the Headlamp Switch (E1) knob in - arrow 1 - and turn it slightly to the right - arrow 2 -.





- Hold rotary handle in this position and pull Light Switch (E1) on rotary handle out of instrument panel - arrow 3 -.

- Disconnect the connector on the Headlamp Switch ( E1).

Installing

- Connect the connector to the Headlamp Switch ( E1).

- Hold the Headlamp Switch (E1), push the rotary handle in and turn slightly to the right.

- Hold the rotary handle in this position and insert the Headlamp Switch (E1) into the instrument panel - arrow 1 -.





- Turn the rotary handle to "0" - arrow 2 -, let it go and engage the Headlamp Switch (E1).