Drive Belt: Testing and Inspection

Ribbed Belt, Checking

- Lift vehicle.
- Remove engine compartment cover, engine side







- Remove bolt/screw - 1 -.
- Release clips - 2 -.
- Take cover out of retainers - 3 -.

NOTE: Do not reuse the clips, renew clips each time cover is removed.







- Crank engine by hand at vibration dampener/pulley - arrow -. Check ribbed belt for:
- Sub-surface cracks (cracks, core ruptures, cross sectional breaks)
- Layer separation (top layer, cord strands)
- Base break-up
- Fraying of cord strands
- Flank wear (material wear, frayed flanks, flank brittleness -glassy flanks-, surface cracks)
- Traces of oil and grease