Mirror Glass

Exterior Rearview Mirror

Mirror Glass

• Wear protective goggles and protective gloves when working!

- Switch off ignition and all electrical components and remove ignition key.

Removing

- Protect housing edges against paint damage e.g. using fabric-reinforced adhesive tape - 2 -.





- Press mirror glass - 1 - into mirror housing at top - arrow -.

- Press mirror glass - 1 - off bracket in housing using Pry Lever - RMV Outside Mirror (80-200) and disconnect harness connectors for mirror heater from rear side of mirror glass.

Installing

- Connect connector terminals for mirror heater to mirror glass.

- Press mirror glass at center on bracket in housing.