Diagram 647/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fresh Air Blower Switch, A/C Switch, Fuel Pump (FP) Relay, A/C Warning Lamp, Fresh Air Blower Series Resistor With Fuse, Fresh Air Blower





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

E9 - Fresh Air Blower Switch

E30 - A/C Switch

J17 - Fuel Pump (FP) Relay Overview of Relay, From June 2002

J220 - Motronic Engine Control Module (ECM) Locations

J234 - Airbag Control Module Airbag System Overview

K84 - A/C Warning Lamp

N24 - Fresh Air Blower Series Resistor With Fuse Heating and A/C Pass Compartment Overview

S5 - Fuses (on fuse/relay panel) Overview of Fuses, From June 2002

S225 - Fuse in Fuse Panel Overview of Fuses, From June 2002

T3c - 3-Pin Connector

T4i - 4-Pin Connector

T6p - 6-Pin Connector

T8 - 8-Pin Connector -D-

T8n - 8-Pin Connector

T10j - 10-Pin Connector

T50 - 50-Pin Connector

T121 - 121-pin connector, on -J220-

(45) - Ground Connection (behind instrument panel, center)

(97) - Ground Connection 1 (in A/C wiring harness)

(503) - Threaded Connection 2, terminal 75x (on relay panel)

(A2) - Plus Connection (15) (in instrument panel wiring harness)

(A20) - Plus Connection (15a), (in instrument panel wiring harness)

(L45) - Connection (in A/C system wiring harness)

(L66) - Connection (in wiring harness) heater blower

Previous Diagram 647/3 (Tracks 15-28)

Next Diagram 647/5 (Tracks 43-56)