Glove Compartment Lamp

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Glove Compartment Lamp

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Carefully pry off the lens from the Glove Compartment Lamp (W6) using the (VAS 3409) or a small screwdriver.





- Remove the Glove Compartment Lamp (W6).

- Disconnect the connector on the Glove Compartment Lamp (W6).

Bulb 12 V/5 W

Installing

Install in reverse order of removal, noting the following:

After repair work of Glove Compartment Light (W6 ), function test of switch must be performed. The Glove Compartment Lamp (W6) must not come on when the glove compartment lid is closed.