Relay Panel and 13-Pin Relay Carrier

Fuse Panel and Relay Carrier

CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to => [ Battery A, Disconnecting and Connecting ] Battery A, Disconnecting and Connecting.

Relay Panel and 13-Pin Relay Carrier

CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to => [ Battery A, Disconnecting and Connecting ] Battery A, Disconnecting and Connecting.

Removing

- Disconnect the Battery (A). Refer to => [ Battery A, Disconnecting and Connecting ] Battery A, Disconnecting and Connecting.

- Remove the instrument panel trim panel on the driver side.

- Loosen both nuts - C - and all connectors - D -.





- Remove the relay panel - B - and relay carrier - A - downward.

Installing

Install in reverse order of removal, noting the following:

- Tighten the nuts - C - to 3 Nm and the threaded connections - D - to 9 Nm.





Current relay assignments.