Door Warning Lamps

Interior Lamps and Switches

• When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic sedge, screwdriver) will be positioned using commercially available adhesive tape.

Door Warning Lamps

Removing and installing the Left Door Warning Lamp (M27) and removing and installing the Right Door Warning Lamp (M28) are identical.

CAUTION!
• Turn off the ignition and all electrical components.

• Remove the key.

• When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.

Removing

- Insert the (VAS 3409) or a small screwdriver behind the lens and pry the lamp out.





- Disconnect electrical connector.

Installing

Install in reverse order of removal, noting the following:

- Make sure the door warning lamps are working correctly.