Clutch Assembly Overview, Sachs

Clutch Assembly Overview, Sachs

• Make sure alignment sleeves for centering engine/transmission are installed in cylinder block; install if necessary.

• If centering sleeves are not present, problems with shifting, changing gears and possibly a noisy transmission (idler rattling) may occur.





1 Dual-mass flywheel

• Make sure centering pins are in place and seated correctly

• Contact surface for clutch lining must be free of grooves, oil and grease

2 Clutch plate

• Removing and installing => [ Clutch, Sachs ] Clutch, Sachs.

• Only replace together with pressure plate

• Installed position => [ Installation Position of Clutch Plate ] Clutch, Sachs

3 Pressure plate

• With adjustment mechanism

• Removing and installing => [ Clutch, Sachs ] Clutch, Sachs.

• Checking ends of diaphragm spring => [ Checking Ends of Diaphragm Spring ] Clutch, Sachs

• Check spring connections and rivet connections => [ Check Spring Connections and Rivets ] Clutch, Sachs

• Only replace together with clutch disc

4 M7 bolt, 20 Nm

• Loosen and tighten in a diagonal sequence and in stages