Rear Seat Belts Assembly Overview

Seat Belts

Rear Seat Belts Assembly Overview





1 - Belt Tensioner

• The retaining tabs determine the position of the automatic belt retractors.

• Removing

• Remove the side trim.

• Remove the belt tensioner, belt relay and the lower anchor.

2 - Tension Disc

3 - Spacer Sleeve

4 - Belt Guide

5 - Cover

6 - Bolt

• 40 Nm

7 - Rear Seat Belt Latch

8 - Bolt

• 40 Nm

9 - Seal

10 - Lower Anchor

11 - Bolt

• 40 Nm

12 - Bolt

• 40 Nm





1 - Belt Tensioner

• The retaining tabs determine the position of the automatic belt retractor.

• Removing

• Remove the backrest.

• Remove bolt - 2 -.

• Remove the anchor.

• Guide the belt through the belt relay.

2 - Bolt

• 40 Nm

3 - Anchorage

• The guide tab determines the position of the fitting.

• Removing

• Remove the side trim.

• Remove bolt - 4 -.

4 - Bolt

• 40 Nm

5 - Rear Seat Belt Latch

6 - Nut

• 40 Nm

7 - Belt

8 - Belt Guide Anchor

• During installation, the seat belt must be threaded through the rear panel from the bottom to the top