Footwell Lamps

Footwell Lamps

Special tools, testers and auxiliary items required

• Removal Wedge (3409)

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( (3409) , screwdriver) will be positioned, using commercially available adhesive tape.

• The foot well lights are located in trim beneath instrument cluster.

• Removal and installation for all foot well lights is performed in the same way and is only described for one light.

Removing

- Switch off the ignition and all electrical consumers and move the ignition key or start button into the 0 position (preliminary engaged position).

- Carefully pry the footwell lamp - 1 - out with the (3409) or a screwdriver.






- Release and disconnect the connector and remove the footwell lamp.

Installing

Install in reverse order of removal.