Front Turn Signal Bulb

Front Turn Signal Bulb

• The illustration depicts removal and installation of left turn signal.

Removing

- Remove front turn signal. Refer to => [ Front Turn Signals ] Front Turn Signals.

- Rotate lamp socket - 1 - in - direction of arrow - and remove it from turn signal housing - 2 -.






- Remove the turn signal bulb - 1 - in the direction of the - arrow - from the bulb socket - 2 -.






Lamp for turn signal : 12V 21W

Installing

Install in reverse order of removal. Note the following:

• Do not touch the glass of the light bulb, when installing. Fingerprints will leave traces of grease on the glass which will evaporate and cloud the glass when the lamp is switched on.