Rear Door Window Checking and Adjusting Height

Rear Door Window Checking and Adjusting Height






Adjustment Dimensions

• Door window - 1 - must dip uniformly 9 mm +/- 1 mm - dimension b - into the seal - 3 -.

- Measure the immersion depth with the gauge (T10391).

- Run the door window all the way down for the adjustment.

- Remove the caps on the underside of the door.

- Install the adjusting screws - 5 - on the window regulator - 4 - using the socket wrench (T10058) , until the measures are reached.

• One turn = 1 mm adjustment.

• Right turn = door window up, left turn = door window down.