Diagram 14/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag Control Module, Safety Belt Switch, Front Passenger's Seat Occupied Sensor, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Driver's Safety Belt Switch Driver Seat Belt Switch -E24-

E25 - Front Passenger's Safety Belt Switch [1][2]Diagrams

G128 - Front Passenger's Seat Occupied Sensor Passenger Occupant Detection System Overview

J234 - Airbag Control Module Control Modules in Interior [1][2]Air Bag Control Module

J285 - Instrument Cluster Control Module Control Modules in Interior

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J533 - Data Bus On Board Diagnostic Interface Control Modules in Interior

T2d - Double Connector, black, connector station driver's side, below seat

T2fv - Double Connector, in front passenger's seat

T2fw - Double Connector, in driver seat

T2kr - Double Connector, in front passenger's seat

T16d - 16-Pin Connector, Data Link Connector (DLC)

T20e - 20-Pin Connector

T32c - 32-Pin Connector

T100 - 100-Pin Connector

(285) - Ground Connection 7 (in passenger compartment wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

Previous Diagram 14/4 (Tracks 29-42)