Diagram 100/10 (Tracks 113-126)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Evaporative Emission (EVAP) Canister Purge Regulator Valve 1, Camshaft Adjustment Valve 1, Intake Manifold Runner Control (IMRC) Valve, Vacuum Booster Pump Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J519 - Vehicle Electrical System Control Module Control Modules in Interior

J623 - Engine Control Module (ECM) Control Modules in Engine Compartment

N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 Locations

N205 - Camshaft Adjustment Valve 1 Locations

N316 - Intake Manifold Runner Control (IMRC) Valve Locations

N318 - Camshaft Adjustment Valve 1 (exhaust) Locations

N401 - Vacuum Booster Pump Valve Locations

T2ek - Double Connector

T2ej - Double Connector

T2gs - Double Connector

T2gt - Double Connector

T2hc - Double Connector

T3af - 3-Pin Connector, black

T14a - 14-Pin Connector, black, connector station 1 in engine compartment, left

T60 - 60-Pin Connector

T94 - 94-Pin Connector

V144 - Leak Detection Pump (LDP) EVAP System

(D180) - Connection (87a) (in engine compartment wiring harness)

* - Applicable from November 2006

** - Only models with US equipment

*** - Applicable through October 2006

Previous Diagram 100/9 (Tracks 99-112)

Next Diagram 100/11 (Tracks 127-140)