Diagram 614/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Clutch position sensor, Vehicle electrical system control module, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

G476 - Clutch position sensor Locations

J519 - Vehicle electrical system control module Control Modules in Interior

J540 - Electromechanical parking brake control module Control Modules in Interior

J623 - Engine control module, in the center plenum chamber Control Modules in Engine Compartment

T4f - 4-pin connector

T5j - 5-pin connector

T16g - 16-pin connector

T30b - 30-pin connector

T94 - 94-pin connector

(398) - Ground connection 33 (in main wiring harness)

(639) - Ground connection on left A-pillar Overview of Ground Connections in Interior

(B335) - Connection 1 (54) (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

(B585) - Positive connection 2 (87a) (in interior wiring harness)

* - Only for vehicles with a manual transmission

Previous Diagram 614/16 (Tracks 197-210)

Next Diagram 614/18 (Tracks 225-238)