Fuel Level Sensor

Fuel System Components

Fuel Level Sensor

• Read the safety precautions before beginning work. Refer to => [ Safety Precautions ] Fuel Supply.

• Observe the rules for cleanliness. Refer to => [ Clean Working Conditions ] Fuel Supply.

• Fuel tank and components overview. Refer to => [ Fuel Tank and Components Overview ] Fuel Tank and Components Overview.

Removing

- Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.

- Pull the fuel level sensor (G) slightly to the side and simultaneously upward.





- If the sensor cannot be released this way, press the retaining tabs - arrows - to the side slightly.





- Note the color of the wire for installing later.

- Disengage the electrical connectors - 1 through 3 - and disconnect them. Bend the retaining hooks on the connector back.





Installing

- Connect the connectors - 1 through 3 -. Note the color coding.





- Pull on the connector to make sure it is securely connected.

- Install the fuel level sensor in the guide on the fuel delivery unit and push down until it engages.

- Install the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] Fuel Delivery Unit.