Striker Pin With Closing Aid Motor

Rear Lid

Striker Pin with Closing Aid Motor

- Remove the lock carrier cover.





- Disconnect connector - 3 - at closing aid motor - 2 -.

- Remove screws - 4 - and remove latch bracket - 1 -.

Installing

- Install striker pin - 1 - and install screws - 4 -.





- Screw - 4 - tightening specification: 23 Nm.

- Secure connector - 3 - at closing aid motor - 2 -.

- Striker pin, adjusting, refer to => [ Striker Pin with Closing Aid Motor, Adjusting ] Rear Lid Overview