C-Pillar Trim, Sedan With Sun Shade

Pillar Trim

C-Pillar Trim with Sun Shade

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Pry trim - 1 - out of mountings using (3409).





- Remove airbag emblem - 1 - and remove screw - 2 - (2 Nm).

- Loosen trim from door seal molding - arrow A -.

- Pull trim inward out of mounts - arrow B -.

• When re-installing, airbag emblem - 1 - must be replaced.





Installation

- To install, perform the steps used for removal in reverse order.