Lower B-Pillar Trim

Pillar Trim

Lower B-Pillar Trim

• Removing and installing on the left side of the vehicle is described here. Removing and installing on the right side is identical.

Removal

- Remove upper B-pillar trim (the belt anchor must not be removed form body), refer to => [ Upper B-Pillar Trim ].

- Remove sill panel trim from catches in door sill in front door area.

- Loosen sill panel trim from mounts in area of B-pillar.

- Remove sill panel trim from catches in door sill in front part of rear door area.

- Remove trim on sides from door seal moldings.

- Remove trim inward out of mounts in body - arrow -.

Driver side only

- On vehicles equipped with interior monitoring, switch off the ignition and disconnect the wiring harness from the interior monitoring deactivation switch (E267) - 1 -.





Installation

- To install, perform the steps used for removal in reverse order.